DIY 101: How to Remove Roller Blinds

How to Remove Roller Blinds

DIY 101: How to Remove Roller Blinds

How To Remove Roller Blinds with Noosa Screens and Curtains in Noosa

Taking down roller blinds can be a simple task, allowing you to clean or replace them effortlessly. Follow the steps below to safely remove your roller blinds with the help of Noosa Screens and Curtains in Noosa:

Prepare the Area

Clear the space around the window by removing any furniture or obstacles that may hinder the removal process. Ensure there is enough room to handle the blinds without causing damage or getting tangled.

Identify the Mounting Type

Roller blinds can be mounted in different ways, such as:

  • Inside Mount: The blinds are installed within the window frame.
  • Outside Mount: The blinds are installed on the wall or above the window frame.

Locate the Mounting Brackets

  • Inside Mount: Carefully inspect the top of the window frame for the presence of mounting brackets.
  • Outside Mount: Check the wall or above the window frame for the brackets.

Remove the Roller Blind

Inside Mount:

  • Using a flathead screwdriver, locate the small tabs or screws on each bracket that secure the roller blind in place.
  • Carefully press or unscrew these tabs or screws to release the blind from the brackets.
  • Once the blind is released, gently lower it down and out of the window frame.

Outside Mount:

  • Depending on the type of brackets used, you may need to unscrew or unclip them from the wall or ceiling.
  • Gradually detach the brackets from the surface, ensuring the blind is fully supported during the removal process.
  • Once the brackets are removed, slide the blind out of the brackets or carefully unroll it.

Store or Prepare for Cleaning

  • If you plan to clean or replace the roller blinds, store them in a safe and clean area to prevent damage.
  • If cleaning, refer to the appropriate cleaning techniques for your specific roller blind material. Follow the cleaning instructions thoroughly before reinstalling the blinds.

Keep Track of Hardware

As you remove the roller blinds, keep track of any screws, tabs, or other hardware used for mounting. Store these pieces in a small bag or container to ensure they are not misplaced or lost during the cleaning or replacement process.

Measure Windows for Blinds

To ensure a proper fit when installing new blinds, follow these steps to measure your windows accurately:

Inside Mount:

  • Measure the width of the window at the top, middle, and bottom. Record the narrowest measurement.
  • Measure the height of the window at the left, center, and right. Record the longest measurement.
  • Note the depth of the window frame to ensure the blinds will fit properly.

Outside Mount:

  • Measure the exact width of the area you want to cover. Add a few inches to the width to ensure complete coverage and light control.
  • Measure the height from the top of where you want the blinds to start to the bottom. Add a few inches to the height to account for mounting brackets.

Removing roller blinds is relatively simple, but it’s important to handle them with care to avoid any damage. By following these steps, you can safely remove your roller blinds for cleaning or replacement purposes with the assistance of Noosa Screens and Curtains in Noosa.